Can we use NORA-W106-00B schematic or the footprint instead of NORA-W106-10B

Hello there!

Thanks for reaching out! Upon checking, you can use NORA-W106-00B instead but consider that the pinout changes a bit compared to NORA-W106-10B. Please check Tables 4 and 5 on pages 14 and 17 from the datasheet to check the pins equivalences.

Hope this helps!

thanks for the response. i have another doubt that the in the schematic i am not able to see the grounds.(is that internally connected inside in the foot print). when i see schematic A7 and B7 pins are merged together. can i use this schematic and foot print will not be an issue

Hi Dedaly,

Thank you for reaching out! It appears that the model was created using an outdated datasheet version. I have also forwarded this request to our engineers so that they can update it.

For the schematic A7 and B7 pins, please follow the guide below:
https://blog.snapeda.com/2019/07/16/how-to-expand-schematic-symbol-pins-in-kicad/

If you have any questions, please let us know!

Hello there,

This is Carlos stepping in for Ron, thanks for patiently waiting. Our team has confirmed that the pin mapping for NORA-W106-00B is accurate. The ground pins for this component are labeled as EAGP and EGP in table 2 on page 17 of the datasheet, and are also visually indicated in gray in Figure 2 on page 14.

Please reach back if you have any other questions, we'd be happy to help!